White 90-degree hose mount for 1-1/8 inch hose, angled view

1-1/8" 90° Hose Mounts

Pack of 3
$24.99
Skip to product information
White 90-degree hose mount for 1-1/8 inch hose, angled view
  • White 90-degree hose mount for 1-1/8 inch hose, angled view
  • 90-degree hose mount on a panel holding a 1-1/8 inch hose through a bend with zip ties
  • Pack of 3 90-degree hose mounts for 1-1/8 inch hose
  • Underside of the 1-1/8 inch 90-degree hose mount
  • Close-up of the 1-1/8 inch 90-degree hose mount showing the hose channel
  • Side view of the 1-1/8 inch 90-degree hose mount
  • White 90-degree hose mount for 1-1/8 inch hose, angled view
  • 90-degree hose mount on a panel holding a 1-1/8 inch hose through a bend with zip ties
  • Pack of 3 90-degree hose mounts for 1-1/8 inch hose
  • Underside of the 1-1/8 inch 90-degree hose mount
  • Close-up of the 1-1/8 inch 90-degree hose mount showing the hose channel
  • Side view of the 1-1/8 inch 90-degree hose mount
1-1/8" 90° Hose Mounts

1-1/8" 90° Hose Mounts

$24.99
Pack SizePack of 3

Free shipping on orders $75+ · Standard shipping $7.99

Stick. Set. Strap. 90-degree mounts that hold 1-1/8" hose securely in place for a clean, supported run.

  • Fits: 1-1/8" inside diameter hose
  • Pack: 3 mounts
  • Mounts your way: 2-part adhesive, tape or screws
  • Tough plastic: boats, trucks, RVs, shop
  • Color: White

How to install

  1. Prep: Clean with isopropyl alcohol or acetone. Scuff glossy surfaces.
  2. Stick: Apply adhesive or tape to the base and press firmly, or fasten with screws.
  3. Set: Give adhesive time to fully cure before loading.
  4. Strap: Seat the hose in the mount, zip-tie it down and trim the tail.

Choose your mounting

2-Part Adhesive (permanent): vibration, wet or hot areas. Let it fully cure before loading.

Double-sided tape (light duty): smooth, clean, dry surfaces. Use high-bond foam tape.

Screws: fasten through the mount where you can drill.

Zip ties, adhesive and screws not included.

You may also like